A Zone area is classified as a place in which an explosive atmosphere consisting of a mixture with air or flammable substances in the form of gas, vapour or mist is likely to occur in normal operation occasionally. These are typically process areas where gases are more likely to be present. A Zone area is classified as an atmosphere where a mixture of air and flammable substances in the form of gas, vapour or mist is not likely to occur in normal operation, but if it does occur, will persist for a short period only. How to classify hazardous areas due to combustible dust.

Employers must classify areas where hazardous explosive atmospheres may occur into zones. The classification given to a particular zone , and its size and location, depends on the likelihood of an explosive atmosphere occurring and its persistence if it does.

Schedule of DSEAR contains descriptions of . Chaque zone ATEX est normalisée en fonction de son degré de dangerosité. The equipment with marking IIC (gas group), cover the groups IIB and IIA. Here you can find information on EX ratings and their suitability for different zones or areas. Applied Measurements can provide you with a complete ATEX monitoring system. Present accidentally (less than h per year), ZONE ZONE 22 . ATEX zones are classified according to two parameters: – the types of combustibles that may be encountered (dust or gas) – the frequency or duration during which an explosive atmosphere is likely to occur.

Read the technical notice before viewing the following techniques.

It is important to fully understand the . It requires the determination of . This system has also been adopted in US, as described in Articles 5and 5of the NEC code. The link below shows a detailed guide to the concept of the ATEX directive as prepared by the European. The higher the probability of an explosive atmosphere occurring and persisting, the higher the integrity requirements of the installed equipment. The relationship between the zones and categories can be varied following a full risk assessment. TypES of proTEcTioN – GAS.

Therefore it is necessary to use primary explosion prevention methods that prevent the space from ever containing an explosive atmosphere covered by ATEX. ATEX and US zone classification for occurrence of explosive atmospheres These primary precautions, which cover both gasoline- and diesel- fuelled beds . A hazardous area is a location which either has or may have an explosive concentration of gas, vapour or dust. The more often the flammable substance is present, the more hazardous the area is.

An area that has the presence of flammable gas. II, Equipment group: II surface industries. Explosion proof in accordance with ATEX. Category: equipment ( suitable for use in Zone 1).

E, European certificate in accordance with harmonised standards. Most of our top quality Atex Zone Signs are in stock and ready for dispatch today. C operating temperature.

ATEX rated for Division Zone environments with a cast aluminum NEMA 4X enclosure. ATEX Zone IECEx and Class Division certified. Designed to operate in the extreme temperatures.